Technical Parameters Of Cellular Module - Advantech SmartFlex SR306 User Manual

7.4 Technical parameters of cellular module

Technical parameters of cellular module

LTE parameters
HSPA+ parameters
UMTS parameters
GPRS/EDGE
parameters
GPRS/EDGE
power classes
Table 33: Technical parameters of cellular module
Antenna Requirements
• VSWR – <2:1 (Antenna input impedance response as function of frequency. This shows
the antenna resonances and its bandwidth).
• SMA – 50
• For good diversity performance, the primary and secondary antennas should have dif-
ferent polarizations.
Bit rate 100 Mbps (DL) / 50 Mbps (UL)
UE CAT. 3
3GPP rel. 9 standard
Supported bandwidths: 5 Mhz, 10 Mhz, 20 Mhz
Supported frequencies: B20 (800 MHz), B8 (900 MHz),
B3 (1800 MHz), B1 (2100 MHz), B7 (2600 MHz)
Max power: typical 23 dBm
Bit rate 42 Mbps (DL) / 5,76 Mbps (UL)
UE CAT. 24, 6
3GPP rel. 5, 6, 7, 8 standard
Supported frequencies: B5 (850 MHz), B8 (900 MHz),
B2 (1900 MHz), B1 (2100 MHz)
Max power: typical 24 dBm
PS bit rate 384 kbps (DL) / 384 kbps (UL)
3GPP rel. 5, 6, 7, 8 standard
W-CDMA FDD standard
Supported frequencies: B5 (850 MHz), B8 (900 MHz),
B2 (1900 MHz), B1 (2100 MHz)
Max power: typical 24 dBm
Data throughput max. 236 kbps
3GPP rel. 99 standard
GPRS multislot class 10
EDGE multislot class 12
Coding schemes CS 1 to 4, MCS 1 to 9
Supported frequencies: 850 / 900 / 1800 / 1900 MHz
Max power: typical 26–32 dBm
GSM 850 CS: Class 4 (32 dBm)
EGSM 900 CS: Class E2 (27 dBm)
DCS 1800 CS: Class 1 (29 dBm)
PCS 1900 CS: Class E2 (26 dBm)
46
SmartFlex SR306