Advantech SmartFlex SR306 User Manual page 27

Lte industrial router

Hide thumbs Also See for SmartFlex SR306:

Table of Contents

Low Power Mode

In applications requiring low power consumption (such as solar power - not 7/24 mode)

is strictly recommended to use LPM mode prior to powering down the entire router.

LPM (Low Power Mode) is a router mode where the router is in sleep mode with minimal

power consumption. The router can be woken up from this mode by a signal applied to the

BIN1 input or after a predetermined period of time. Putting the router into LPM mode can be

done using the lpm command, see

Consumption in LPM mode may vary depending on the configuration of the router.

SmartFlex SR306

Commands and Scripts

application note for more details.

Table of Contents