Inserting the GasAlertMicroClip
a
Infrared or intense ambient light (sun or halogen) may
interfere with the station/detector communication.
Figure 9. Inserting the GasAlertMicroClip
Caution
Table 10. Inserting the GasAlertMicroClip
Item
1
Module lid
2
Release tabs
3
Detector bay
4
Alligator clip
5
Charger status indicator
If the GasAlertMicroClip detector is fitted with a calibration
cap or auxiliary filter, it must be removed prior to inserting it
into the docking module.
1.
Activate the detector and wait until it is in normal
operating mode.
2.
Ensure the alligator clip is closed and the ring is
resting flat on the detector to prevent disruptions
with the transmission.
3.
Press the two release tabs on the docking module
and raise the lid.
aWarning
The docking module lid only raises upward 30
force the lid beyond its limit.
MicroDock II
Inserting the GasAlertMicroClip
Description
Note
o
. Do not
17