Introduction - BW Technologies MicroDock II User Manual

Introduction

a Warning
To ensure personal safety, read the
before using the MicroDock II Base Station.
The MicroDock II Automatic Test and Calibration Station
("the station") provides automated calibration and bump
testing for
•
GasAlertClip Extreme,
•
GasAlert Extreme,
•
GasAlertMicro,
•
GasAlertMicro 5,
•
GasAlertMicro 5 PID, and
•
GasAlertMicroClip detectors.
Safety Information
The station also provides data transfer for
•
GasAlert Extreme, and
•
GasAlertMicroClip detectors.
A maximum of ten modules can be connected to the station.
There is a maximum of six charging modules.
Six charging modules plus four non-charging modules can
be connected to the station.
MicroDock II
Note
1