Installation; Assembly Of Motor-Driven Models; Disassembly Of Motor-Driven Models - Invacare Porto NG User Manual

3.3 Installation

WARNING!
Risk of injury
– Leave sufficient room (approximately 15 cm)
behind the Lift-Out Chair to prevent it from
coming into contact with the wall when in
reclined position.
– Always place the Lift-Out Chair on a completely
flat surface to ensure optimal stability during
use.
– Do not place the Lift-Out Chair near a staircase.

3.3.1 Assembly of motor-driven models

A
1578225-G
B
1. Align the backrest with the seat to fit the locking
mechanism A.
2. Slide the backrest down until you hear a clicking sound.
The mechanism on both sides should be locked A.
3. Close the cover B behind of the backrest .
Make sure the backrest is properly locked on the
seat, by pulling firmly at the backrest. If the backrest
doesn't stay fixed, repeat the assembly.

3.3.2 Disassembly of motor-driven models

B
A
Setup
9