scan the bar code below and then scan a digit (1-9) bar code and the Save bar
code on the
Programming Chart
inside the back cover of this manual. Default =
One.
Number of Pulses
Number of Beeps – Error
The number of beeps and LED flashes emitted by the scanner for a bad read or
error can be programmed from 1 - 9. For example, if you program this option to
have five error beeps, there will be five error beeps and five LED flashes in
response to an error. To change the number of error beeps, scan the bar code
below and then scan a digit (1-9) bar code and the Save bar code on the
Pro-
gramming Chart
inside the back cover of this manual. Default = 1.
Number of Error Beeps/LED Flashes
3 - 4