POWR
2. Remove the flywheel magnet.
cC
To prevent damage to the engine or tools,
screw in the flywheel puller set bolts
evenly and completely so that the fly-
wheel
puller plate is parallel to the flywheel mag-
net.
NOTE:
Apply force to the crankshaft end until the fly-
wheel magnet comes off the tapered portion
of the crankshaft.
Flywheel puller: 90890-06521
3. Remove the Woodruff key.
5-17
Power unit
6B450090
Removing the electrical components
1. Remove the bracket 1. (WH, W: CDI
unit, starter motor, starter relay and recti-
fier)
2. Remove the base assembly 2.
3
1
3. Remove the spark plug caps from the
spark plugs, and then remove the ignition
coil 3.
Removing the throttle pulley assembly
1. Removing the throttle pulley assembly.
2
6F650210
6F650230
6F65G11