Table of Contents
Advertisement
Introduction
WARNING: Before you do any maintenance
work you must read and understand the
safety chapter.
Maintenance schedule
Maintenance
Clean the external surfaces of the product with a clean and dry cloth. Do not use
water.
Keep the handles dry and clean. Remove oil or grease.
Make sure that the Start/Stop button operates correctly and is not damaged.
Make sure that the power trigger operates correctly.
Make sure that nuts and screws are tight.
Make sure that the release buttons on the battery operates correctly and locks
the battery into position.
Make sure that all couplings, connections and cables are not damaged. Remove
dirt.
Make sure that the battery connectors are not damaged.
To do a check of the air intake
1. Make sure that the air intake is not blocked.
2. Stop the product and remove unwanted material if it
is necessary.
1166 - 002 - 29.10.2019
Maintenance
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a dry
cloth. Keep the battery guide tracks clean.
3. Make sure that these parts are clean before the
battery is connected to the battery charger or the
product:
a) The terminals on the batteries.
b) The terminals on the battery charger.
c) The terminals on the backpack blower.
Daily
Weekly
X
X
X
X
X
X
X
CAUTION: A blocked air intake
decreases the performance of the
product and can cause the motor to
become too hot.
Monthly
X
17
Advertisement
Table of Contents
