Installing The Home Station - LG VR657 Series Owner's Manual

1. Position the home station against a wall on hard, level flooring to
prevent sliding during docking.
It is not recommended to install the home station on carpet. Doing
so may cause the Robot Cleaner to have difficulty docking.
Remove objects within 5 ft. (1.5 m) to the right and left side and
ft. (2 m) to the front.
within 6 /
1
2
2. Plug the jack into the home station.
3. Plug the power cord into an outlet.
Wrap the remaining power cord around the cord keeper on the
back side of the home station or along the wall surface so that the
travel path of the Robot Cleaner will not be obstructed.
4. Fix the home station against the wall so that it does not move.
5. When the remote is not in use, store it in the remote holder on the
home station.
Tip
• Always keep the home station plugged in when in use. If the home station is not plugged
in, the Robot Cleaner will not return to the station to charge automatically.
Warning Do not operate the Robot Cleaner if the home station has a damaged cord
or plug, if it is not working properly, or if it has been damaged or dropped. To
avoid electrical hazards, the cord must be replaced by LG Electronics, Inc. or a
qualified service person.

INSTALLING THE HOME STATION

5 ft. (1.5 m)
ft. (2 m)
6 /
1
2
5 ft. (1.5 m)
power cord keeper
17