Table of Contents
Advertisement
OVERVIEW
Install the home station. (p17)
1
Insert the power cord plug into an outlet and locate
the station against a wall. If power is not supplied to
the home station, the Robot Cleaner will not charge.
Turn on the power supply of the Robot
2
Cleaner. (p18)
Turn on the power switch located on the rear-
left side of the Robot Cleaner. Press the Start/
Stop button on the Robot Cleaner or the Start
button on the remote.
Check the dust bin.
3
Empty the dust bin if necessary.
Select the desired cleaning mode and options.
4
(p23-29)
Set the cleaning mode and options using the
buttons on the Robot Cleaner or on the remote.
Start cleaning. (p19)
5
Press the Start/Stop button on the Robot Cleaner
or the Start button on the remote. Cleaning begins
once the Robot Cleaner reverses and turns around.
Automatic charge. (p20-22)
6
The Robot Cleaner automatically returns to the home
station to charge. If the Robot Cleaner is in the
middle of cleaning and runs out of battery charge,
it returns to the home station to recharge and then
continues cleaning where it left off once the battery
is fully charged.
It takes approximately three hours for the battery to
fully charge.
Warning
If the Robot Cleaner is operated with the dust bin compartment lid left open, it
can cause an injury or serious damage to the product.
16
5 ft.(1.5 m)
ft.(2 m)
6
1
/
2
5 ft.(1.5 m)
Advertisement
Table of Contents
