Page 2
FEATURES Corner Master By having adopted a brand new concept design that is appropriate for walls, the Robot Cleaner's cleaning performance is incredibly efficient. Learning Mode The Robot Cleaner is capable of memorizing the cleaning environment via its Smart Operation feature for smarter cleaning. Turbo Mode In the Turbo mode, the Robot Cleaner operates the suction motor and the brushes at a greater speed giving cleaner results.
CONTENTS BEFORE USING HANDLING METHOD AFTER USE Safety precautions Cleaning the dust bin Included with product Cleaning the dust bin filter Parts description Cleaning the brush 10~11 Button functions Cleaning the sensors/charging terminals Display status information Cleaning the side brush Before you start Cleaning the ultra microfiber mop (option) Overview...
3. If the supply cord is damaged, it must be replaced by LG Electronics Service Agent in order to avoid a hazard 4. This appliance can be used by children aged from 8 years and above and persons with reduced physical,...
Page 5
Failure to follow this warning can cause electric shock, fire or product failure. If the power cord is broken, do not plug it in. Take the product to an LG Electronics Authorised service repairer. Do not place the home station...
Page 6
SAFETY PRECAUTIONS WARNING Do not spray or use Turn the power supply off inflammable materials, immediately if any abnormal sound, odor, or smoke is surfactants, or drinking water generated from the Robot in the vicinity of the Robot Cleaner by removing it from the Cleaner.
Page 7
Doing so can cause product failure. Do not put any water failure. or detergent on the Robot Cleaner. If liquids get inside of the Robot Cleaner, turn off the power supply and contact an LG Electronics sales agent or customer care center.
Page 8
SAFETY PRECAUTIONS CAUTION If the floor is wet or has wet When the robot cleaner is spots, wipe them up before operating, it may hit the chair leg, desk leg, table leg or other using the Robot Cleaner. Do narrow pieces of furniture. not use the Robot Cleaner on a wet surface.
Avant toute utilisation, lisez attentivement la rubrique "Précautions relatives à la sécurité" pour le bon fonctionnement du produit. Après avoir lu le manuel d'utilisation, conservez-le dans un endroit facilement accessible à tout moment. www.lg.com Particulate filter Quick guide Operation manual...
Page 10
PARTS DESCRIPTION - ROBOT CLEANER Plan view Upper camera sensor Dust bin cover Display & function buttons Dust bin compartment release button Front view Ultrasonic sensors Obstacle detecting sensor window Detecting sensors of home station & Receiving sensors of remote controller Rear view Main Power switch Ventilation port...
Page 11
PART DESCRIPTION – HOME STATION / DUST BIN Home station Remote controller holder Charging terminals Power cord fixing hook Dust bin Dust bin handle Cleaning tool Dust bin lid Suction port flap Sponge filter Dust bin lid opening button Particulate filter Filter cover s Figures can be different from actual objects.
BUTTON FUNCTIONS – ROBOT CLEANER • If the button is pressed, ‘Turbo Mode’ will be set with a voice confirmation. TURBO • If the button is pressed whilst in ‘Turbo Mode’ , it will be canceled. • Used to turn the power on from Standby, start or stop cleaning. •...
Page 13
BUTTON FUNCTIONS – REMOTE CONTROLLER Power Pressing this button will Home turn the power on from Used to recharge the Robot Standby or the power will be Cleaner by making it return to the returned to Standby while Home Station. (p.18) the power is ON.
DISPLAY STATUS INFORMATION Mute icon This icon indicates Lock icon whether the Mute is Indicates ON or OFF. whether 'Lock‘ is Battery icon activated or not. This icon indicates Remote the residual battery connection Icon level, it flashes if Is Displayed when the battery needs the smartphone recharging.
BEFORE YOU START Check these items before cleaning • Do not use this device in a room where a child is left alone. The child could be injured. • Remove fragile or unnecessary objects from the room to be cleaned. Especially, remove expensive ceramics and valuables from the floor.
OVERVIEW Install the home station. (p.15) Insert the power cord plug into an outlet and locate the station against a wall. If power is not supplied to the home station, the Robot Cleaner will not charge. Turn on the power supply of the Robot Cleaner.
Do not operate the Robot Cleaner if the Home Station has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped. To avoid electrical hazards, the cord must be replaced by LG Electronics, Inc. or a qualified service person.
HOW TO TURN THE ROBOT CLEANER POWER SUPPLY ON & OFF Turning on the main power supply Make sure the Power Switch is on at the rear-left of the Robot Cleaner. If the power is OFF, turn the switch ON. ※...
HOW TO START AND STOP CLEANING Using the buttons on the Robot Cleaner After the Robot Cleaner main power switch is turned on, press the START/STOP button to begin cleaning. A melody will sound and cleaning will begin. Press the START/STOP button during the cleaning cycle to stop cleaning.
HOW TO CHARGE THE BATTERY Automatic charging The Robot Cleaner returns to the home station at the end of a cleaning cycle or when its battery is running low. ※ If 10 minutes elapse without the Robot Cleaner moving or the battery is too low, the power will be automatically turned OFF.
Page 21
HOW TO CHARGE THE BATTERY Remaining Battery Charge Indicator The Battery level is indicated on the Status Display, as follows. • If recharging is in progress, the Battery Level indicator flashes showing the battery charge status level. • If recharging is complete, only the 'Battery' and 'Clean Mode' icons are displayed to save the energy. •...
To purchase a strip for use with a model that did not include one, or to purchase additional strips, visit the LG website at www.lg.com. 1. Use a Magnetic Wall strip to block off areas the robot cleaner should not enter.
CLEANING MODES Zigzag Cleaning In 'Zigzag' mode, Robot Cleaner repeats a zigzag operation to clean each and every spot in the cleaning area. If you need to quickly clean an area choose 'Zigzag' mode. Press ‘Mode’ button on Remote Controller or main unit to select 'Zigzag' mode and press ‘...
Page 24
CLEANING MODES My Space Cleaning Pressing 'My Space' on the Remote Controller will set the My Space cleaning mode with a voice message. For cleaning of particular spaces, select this mode. The 1st stage: Use the Remote Controller to manually set the parameters of each cleaning block.
AUXILIARY CLEANING MODES Manual Cleaning By pressing a direction key on the Remote Controller, you can move the Robot Cleaner manually. Robot Cleaner will clean the area, by pressing the forward/backward/left/right buttons accordingly on the keypad of the remote control. While in 'Manual' mode, the robot cleaner will run into obstacles placed behind it if the backward key on the remote is pressed or held down.
Page 26
AUXILIARY CLEANING MODES Turbo Mode Pressing the 'Turbo' button on the Remote Controller or main unit will activate 'Turbo' mode, with a voice message. While in 'Turbo' mode, pressing the same button will cancel 'Turbo' mode, with a voice message. In 'Turbo' mode, Robot Cleaner runs more intensely for a powerful clean.
TIME SETTING You can set or change the current time on the Robot Cleaner. Pressing ‘Clock' button on the Remote Controller, when the Robot Cleaner is in standby mode, will start the clock setting mode. Set the hour by using 'uv' buttons Flickering on Remote Controller.
SCHEDULED CLEANING You can schedule cleaning (reservation) so that the Robot Cleaner starts cleaning at a scheduled time. Pressing 'Schedule' button on Remote Controller, only when the Robot Cleaner is recharging, will start the scheduled cleaning setting. Setting/Cancelling the schedule cleaning is only possible when the unit is recharging on the home station Select ‘Once reservation’...
CLEANING Attach the mop according to the following description. Caution Make sure that the mop does not cover the camera sensor on the bottom. Attaching the mop Failure to do so can cause a malfunction. For mop cleaning, mount the mop cloth and mop plate(self-wetting mop plate) to the Robot Cleaner according to the following instructions.
CLEANING (FOR SELF-WETTING MOP PLATE ONLY) he self-wetting mop plate is provided only for some models. You can find detailed information from the sheet enclosed in the manual. Refilling with water Refill the self-wetting mop plate with water according to the following description.
Page 31
CLEANING (FOR SELF-WETTING MOP PLATE ONLY) Checking before installation Before use, lightly tap and shake the self wetting mop plate to check for any water already present Duckling inside. The water from the self-wetting mop plate should always be emptied after use to prevent odours or contamination.
If there is still water leakage after the above operation, please replace the cotton with a new one. The cotton of the Self-wetting mop plate is a consumable. If you need to purchase it, please contact the Service Station of LG Electronics or go to LG's official website.
LOCATION SEARCH FUNCTION The Robot Cleaner remembers its location while cleaning. If the user moves the Robot Cleaner while it is operating, it will search for the location it was moved from by using its navigational location search function before continuing to clean.
SMART DIAGNOSIS Robot Cleaner uses this Smart Diagnosis feature to run a self-diagnosis. If any irregularity is found from the diagnosis, please contact the local LG Electronics service center. ※ During Smart Diagnosis, the Robot Cleaner will move about within a 50 cm radius. So, make sure no objects are in the way within a 1 m radius around the Home Station, before starting Smart Diagnosis.
Page 35
Smart diagnosis mode will be turned off. Please try smart diagnosis again after turning the main power switch off and on from the back of Robot Cleaner. If the problem continues, please contact LG Electronics customer care. Smart Diagnosis mode cannot be operated with mop plate Run Smart Diagnosis again after removing the Mop being attached.
SMART APPLICATION FUNCTION You can control the Robot Cleaner from your smartphone. The "LG Robot Cleaner" application provides the following functions: • Simple Control, Cleaning Diary, Schedule Cleaning, Smart Diagnosis AP with Internet access Smartphone (Android or iOS) Robot Cleaner with network access...
Page 37
1. The [Startup Screen] opens when you run the "Smart ThinQ" application. Select “Country/ Language” and click “LG Account Login”. 2. You can sign up with the [Create account] button on the "sign in screen" page. Fill the Blanks on [create account screen] page to create account.
Page 38
SMART APPLICATION FUNCTION How to register the product You will need to register the product on the application to control the Robot Cleaner from your smartphone. Add your Robot Cleaner to the app with the Tag On feature to use the Smart function. 1.
Page 39
SMART APPLICATION FUNCTION Product network / Register product (Android) 1. Press and hold the "TURBO" button for 3 seconds. 2. By selecting your AP on the "Wi-Fi network" list, you will automatically be directed to the product registration mode. 3. After registration is complete, the [Dashboard] screen will open. 4.
Page 40
SMART APPLICATION FUNCTION Product network / Register product (iOS) 1. Press and hold the "TURBO" button for 3 seconds. 2. Turn on the “Wi-Fi” function in iPhone “Settings.” 3. Press the “Check connection” button on the "Smart ThinQ" application after connecting to “LG_HOMBOT_REG~”...
Page 41
SMART APPLICATION FUNCTION Startup screen of application The following screen will open when you connect to the Robot Cleaner for the first time from the "Smart ThinQ" application: Displays the product's nickname. The home icon selects Menu the product list page. Schedule Cleaning, (Dashboard) Cleaning Diary, Smart...
Page 42
SMART APPLICATION FUNCTION Startup screen of application Menu Schedule Cleaning, Cleaning Diary, Smart Diagnosis, Setting. Simple Control You can run Robot Cleaner manually on the Simple control screen. In addition, you can start cleaning or self navigate it back to the docking station by pressing the "Start Cleaning"...
Page 43
SMART APPLICATION FUNCTION Simple Control You can operate the Robot Cleaner manually on the Simple control screen. In addition, you can start cleaning or self navigate it back to the docking station by pressing the "Start Cleaning" or "Start Charging" button. 'The "Start Cleaning"...
Page 44
SMART APPLICATION FUNCTION Menu – Schedule Cleaning You can schedule the time you want the Robot Cleaner to start cleaning. To set up Schedule cleaning, toggle across the Schedule cleaning key to turn it on or off in the Schedule cleaning menu. After enabling Schedule cleaning, set up the time and repetition, and then click "Save"...
Page 45
SMART APPLICATION FUNCTION Menu – Cleaning Diary You can view the diary to find out when the Robot Cleaner did the cleaning. Cleaning Diary records information such as date, mode, and the start and completion times of each cleaning. Click Play button on the right of the completed cleaning list; an active cleaning map of that particular cleaning event will appear.
Page 46
Be sure to resolve any issue identified in the diagnosis by taking a corresponding measure. If the symptom persists, contact the customer service center of LG Electronics. • Smart Diagnosis on the application provides the same function as that of the remote control.
Page 47
SMART APPLICATION FUNCTION Menu – Setting You can check or change the current information set up on Robot Cleaner. Click Voice gender to change the voice of the Robot Cleaner to male or female. Click Product nickname to change the current nickname of the Robot Cleaner; a pop-up where you can enter a new nickname opens (up to 10 characters allowed including English, Korean and numeric).
Page 48
SMART APPLICATION FUNCTION Misc. 1 - Software update The network-enabled model of the Robot Cleaner can update the software automatically via the application. 1. Make sure that the "Smart ThinQ" application is up to date on the Play Store.(Unless you update the app to the latest version, software update will not be available.) 2.
Page 49
SMART APPLICATION FUNCTION Misc. 2 - Mode You can order to robot cleaner simply without connection with robot cleaner through Mode function. Mode function has total 4 functions. If you push ‘ A pplied’ button, Robot cleaner will act according to Mode like below.
3. Pressing "Start/Stop" again will turn Robot Cleaner on with a melody. ※ Any dispute between seller and buyer is an issue between the two parties. LG Electronics provides a product initialization function for smooth transaction. • Initialization returns the following information as factory default setting.
CLEANING THE DUST BIN If the dust bin is full, suction power can be reduced. Clean the dust bin before or after each cleaning session. Clean the dust bin using the following sequence: 1. Open the dust bin compartment cover by pressing the PUSH button on the Robot Cleaner.
CLEANING THE DUST BIN FILTER The Dust Bin Filter consists of a Particulate and Sponge Filter. Clean both the Particulate and Sponge filters as per the following sequence. 1. Pull the hook on the left of the Particulate Filterr module on the rear side of Dust Bin to separate the Particulate Filter and the sponge.
CLEANING THE BRUSH The rotating Brush, located on the bottom of Robot Cleaner, helps collect the dust. Clean the Brush as per the following sequence. (The shape of the brush may be different depending on the model.) ※ Before turning over the main unit, lay a soft cloth on the floor and remove the Dust Bin. Otherwise, the main unit can get scratched and dust will fall from the Dust Bin.
CLEANING THE SENSORS/CHARGING TERMINALS There are sensors on the Robot Cleaner that detect obstacles, stairways and the home station for charging the battery. In order to maintain the performance of the Robot Cleaner, regularly clean the sensors and charging terminals as follows: 1.
CLEANING THE SIDE BRUSH Foreign objects/materials such as hair can easily adhere to the side brush. Remove such materials at least once a week. If excessive amounts of foreign materials are stuck to the brush, there is the risk of damage to the brushes. If the floor is rough or frequently cleaned, the side brushes may bend or become deformed.
※ If the Mop is used in a damp or wet state, it will cause the Robot Cleaner to malfunction. • To avoid product malfunction, only use the ultra microfiber mop provided with the Robot Cleaner. • Additional microfiber mops can be purchased by visiting a nearby LG Electronics service center.
TROUBLESHOOTING Upon a voice message, "The wheels are not touching the floor. Please move Robot Cleaner onto flat floor." A warning message will be given if a wheel does not contact the floor surface for any reason. • Is a wheel trapped in the front door, balcony, stairway, etc? s Move the Robot Cleaner on to the flat floor.
Page 58
TROUBLESHOOTING Upon a voice message, "Please check if the dust bin is installed with the filter." A warning message will be given if there is no Dust Bin or Filter housing fitted. • Is the Dust Bin fitted to the Robot Cleaner? s Open the Dust Bin compartment cover and check to ensure the Dust Bin is in place.
Page 59
TROUBLESHOOTING Upon a voice message, "Please remove foreign material from the brushes on the bottom." (The shape of the brush may be different depending on the model.) A warning message will be given if foreign materials restrict the Brush's rotation. Turn off the main power switch on the rear of the Robot Cleaner.
BEFORE YOU CALL FOR SERVICE Confirm before reporting the failure of Robot Cleaner. Problem Solutions (Reference page) The power supply cannot be Check that the power switch is turned on. (p.16) turned on. The power supply This is not a failure. Robot Cleaner has its own power saving automatically turns off.
PRODUCT SPECIFICATIONS Item/Model LG Robot Cleaner VR669***** External Dimensions 340 mm × 340 mm × 89 mm Power Consumption 58 w Weight 3 kg Traveling Velocity 350 mm/s (Maximum) Use Time Up to 100 minutes (Based on general wooden floor)
Page 62
Rating DC 14.4 V / 2330 mAh LG Electronics Inc. hereby declares that this Automatical Battery Operated Vacuum Cleaner with Docking Station is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between...
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.