Performance Testing (Iec 62929 Standard) - LG VR657 Series Owner's Manual

PERFORMANCE TESTING (IEC 62929 Standard)

Dust Removal Test - Box(Hard Floor & Carpet)
1. Put fully charged Robot Cleaner down on start point and turn on.
2. Push TURBO button on the Robot Cleaner or Turbo button on the remote and Robot Cleaner will
be set to Turbo Mode.
3. Push the Repeat button on the remote and Robot Cleaner will be set to Repeat Mode.
4. Push the START/STOP button on the Robot Cleaner or
Cleaner will operate.
Dust Removal Test - Straight Line(Hard Floor & Carpet)
1. Put fully charged Robot Cleaner down on start point and turn on.
2. Push both the Schedule button and the Mode button for 3 seconds to
access the Test Mode(Straight).
3. (1) In case of testing on Hard Floor, LED expression : T-H .
(2) In case of testing on Carpet, LED expression : T-C.
※ Change LED expression by pushing the Mode button on the
remote or the MODE button on the Robot Cleaner.
4. Push the START/STOP button on the Robot Cleaner or
the remote and the Robot Cleaner will operate.
[Hard Floor Test mode]
Autonomous navigation/coverage test
1. Put fully charged Robot Cleaner down on start point and turn on.
2. Push the Repeat button on the remote and Robot Cleaner will be set to Repeat Mode.
3. Push the START/STOP button on the Robot Cleaner or
Cleaner will operate.
※ Use this mode only when organizations test cleaning performance or driving performance according
to IEC62929
button on the remote and Robot
button on
[Carpet Test mode]
button on the remote and the Robot
45