Patton SmartNode 5300 Quick Start Manual page 2

WARNING
WARNING
WARNING
2
• This device contains no user serviceable parts. The equipment shall be
returned to Patton Electronics for repairs, or repaired by qualified ser-
vice personnel.
• The external power adapter shall be a listed Limited Power Source. The
mains outlet that is utilized to power the devise shall be within 10 feet
(3 meters) of the device, shall be easily accessible, and protected by a
circuit breaker.
• If an AC power adapter is used, ensure that the power cable used meets
all applicable standards for the country in which it is to be installed, and
that it is connected to a wall outlet which has earth ground.
• Hazardous network voltages are present in WAN ports regardless of
whether power to the unit is ON or OFF. To avoid electric shock, use
caution when near WAN ports. When detaching the cables, detach the
end away from the device first.
• Do not work on the system or connect or disconnect cables during peri-
ods of lightning activity.
This device is NOT intended nor approved for connection to the PSTN. It is
intended only for connection to customer premise equipment.
This device contains no user serviceable parts. This device can only be
repaired by qualified service personnel.
In accordance with the requirements of council directive 2002/96/EC on
Waste of Electrical and Electronic Equipment (WEEE), ensure that at end-of-
life you separate this product from other waste and scrap and deliver to the
WEEE collection system in your country for recycling.
SmartNode 5300 Quick Start Guide