Table of Contents
Advertisement
FatTwin F628R3-FT USER'S MANUAL
Connectors
Battery
COM1
FAN1/2
IPMI_LAN1
JLAN1/JLAN2
JIPMB1
JP3/JP4
JP5
JPCIE1
JPCIE2
JTPM1
JSD1/JSD2
JSTBY1
JUSB1
JUSB2
JUSB3
JVGA1
I-SATA0-5
S-SATA0-1
S-SATA2/3
L-SAS0-3/4-7 (X10DRFF-C
Only)
I-SGPIO1/2
S-SGPIO
SP1
SW1
UID (JUIDB1)
Note: To provide adequate power supply to the serverboard, be sure to connect
the 8-pin power connector (JP5) and the 4-pin power connectors (JP3/JP4) to the
power supply. Failure to do so might void the manufacturer warranty on your power
supply and serverboard.
X10DRFF Serverboard Connectors
Description
Onboard CMOS Battery (See the Note on Page 1-3.)
Serial port header
CPU/system cooling fan headers 1/2
IPMI_Dedicated LAN Port (JIPMI_LAN1)
Gigabit LAN Ports 1/2 (LAN1/2)
2
4-pin external BMC I
C header (for an IPMI Card)
4-pin power connectors
8-pin power connectors
CPU1 Slot1 PCI-Exp. 3.0 x16 slot
CPU2 Slot2 PCI-Exp. 3.0 x16 slot
TPM (Trusted Platform Module)/Port 80
SATA DOM (Device_On_Module) power connection headers 1/2
5V standby power header
Rear USB 3.0 Port 1(3.0)
Rear USB 3.0 Port 2 (3.0)
Front_Accessible USB USB 3.0 Connector 6
VGA Port (VGA)
I-SATA Connectors 0-5 (supported by the Intel PCH)
S-SATA Connectors 0-1 (supported by the Intel SCU)
SATA DOM (Device_on_Module) and Power Connectors 2/3
SAS Connections 0-3/4-7 supported by the LSI SAS controller
SATA General Purpose I/O Headers 1/2 (I-SGPIO1:I-SATA 0-3, I-SGPIO2: I-SATA
4/5 supported by Intel PCH)
SCU General Purpose I/O Header 3 for S-SATA 0-3 support (from the SCU chip)
Internal buzzer/Onboard speaker
Power switch
UID (Unit-Identifi er) button
5-14
Advertisement
Table of Contents
