2.15 Wall Mounting
2.15.1 Wall Mounting the VPS
Mounting on a Wooden Wall
1.
Place the appropriate wall mounting template (found on the last 2 pages of this manual) on the wall to mark
the locations where the 3 screws need to be placed.
KX-TVM50
2.
Install the screws and washers (included) in the wall.
Washer
Drive the screw
to this position.
Note
•
Drive the screws into the wall until each screw head is the same distance from the wall.
•
Install the screws perpendicular to the wall.
3.
Mount the unit as shown.
Document Version 2.1 2008/04
120 mm
232 mm
KX-TVM200
130 mm
2.15.1 Wall Mounting the VPS
250 mm
Installation Manual
73