Panasonic KX-TVM50 Installation Manual page 4

Voice processing system
Hide thumbs Also See for KX-TVM50:
Table of Contents

Advertisement

Important Safety Instructions
For users in Taiwan:
Lithium batteries can be found in the circuit boards of the main board and optional cards of the PBX.
When disposing of any of the above products, all batteries must be removed. Follow the applicable laws,
regulations, and guidelines in your country/area regarding disposal of batteries.
When replacing a battery, use only the same battery type, or an equivalent recommended by the battery
manufacturer.
Regarding removing or replacing a battery in the circuit board, consult your dealer.
For users in Finland, Norway and Sweden:
This unit may only be installed in a room or space with restricted access, and equipotential bonding must be
applied. For information on earthing, refer to 2.11 Frame Earth Connection.
For users in Germany:
Machine Noise Information Ordinance, 3rd GPSGV: The highest sound pressure level is 70 dB (A) or less
according to EN ISO 7779.
The equipment is not intended for use at a video workstation in compliance BildscharbV.
WARNING
UNPLUG THIS UNIT FROM POWER OUTLETS IF IT EMITS SMOKE, AN ABNORMAL SMELL OR
MAKES UNUSUAL NOISE. THESE CONDITIONS CAN CAUSE FIRE OR ELECTRIC SHOCK.
CONFIRM THAT SMOKE HAS STOPPED AND CONTACT AN AUTHORISED SERVICE CENTER.
THIS UNIT MAY ONLY BE INSTALLED AND SERVICED BY QUALIFIED SERVICE PERSONNEL.
WHEN A FAILURE OCCURS WHICH EXPOSES ANY INTERNAL PARTS, DISCONNECT THE
POWER SUPPLY CORD IMMEDIATELY AND RETURN THIS UNIT TO YOUR DEALER.
DISCONNECT THE TELECOM CONNECTION BEFORE DISCONNECTING THE POWER
CONNECTION PRIOR TO RELOCATING THE EQUIPMENT, AND RECONNECT THE POWER
FIRST.
TO PREVENT FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
THIS UNIT IS EQUIPPED WITH AN EARTHING CONTACT PLUG. FOR SAFETY REASONS, THIS
PLUG MUST ONLY BE CONNECTED TO AN EARTHING CONTACT SOCKET WHICH HAS BEEN
INSTALLED ACCORDING TO REGULATIONS.
THE POWER SUPPLY CORD IS USED AS THE MAIN DISCONNECT DEVICE. ENSURE THAT THE
AC OUTLET IS LOCATED NEAR THE EQUIPMENT AND IS EASILY ACCESSIBLE.
CAUTION
DANGER OF EXPLOSION EXISTS IF THE BATTERY IS INCORRECTLY REPLACED. REPLACE THE
BATTERY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE BATTERY
MANUFACTURER. DISPOSE OF USED BATTERIES ACCORDING TO THE MANUFACTURER'S
INSTRUCTIONS.
4
Installation Manual
SAVE THESE INSTRUCTIONS
Document Version 2.1 2008/04

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tvm200

Table of Contents