Panasonic KX-TVM50 Installation Manual page 142

5.4 KX-TE Series PBX Programming for Inband Integration
7.
Enable Data Line Security for each extension connected to the VPS. Click Apply to save the changed
data.
8.
Program the appropriate trunk feature settings depending on how your customer plans to use the VPS: a)
to answer all incoming calls, b) as an operator backup, or c) to only answer calls not answered by user
extensions.
a.
If the VPS is answering all calls:
Go to the 3.CO - 1.Line Mode screen. Program all lines DIL to the first extension of the Voice Mail
hunt group. The PBX will allow incoming trunk calls to hunt only if the trunks are DIL to the first port of
the hunt group. Lines programmed as Normal do not hunt. Click Apply to save the changed data.
b.
If the VPS is only answering calls not answered by the operator (Operator Backup):
Go to the 3.CO - 2.Incoming / Outgoing screen. Program lines to ring operator extensions immediately
for all time modes. To give the operator (extension 101 in this example) time to answer the call before
142 Installation Manual Document Version 2.1 2008/04