Panasonic KX-TVM50 Installation Manual page 151

Example Settings (2)
Program the PBX to direct incoming trunk calls to an operator, and to then direct those calls to the VPS when
the operator does not answer.
1.
Program the PBX so that incoming trunk calls are directed to an operator (DIL feature).
a.
Go to the 4-1 Trunk Line screen.
b.
Assign the Destination for each time mode and trunk to a specific extension number.
c.
Click Apply to save the changed data.
Note
•
Specify the FDN for the extension group to which Operator has been assigned.
•
Set the First Ring Delay Timer setting to 5 s (the default is 0 s).
2.
Program the PBX so that unanswered calls to the operator are redirected to the VPS (Intercept Routing
No Answer feature).
a.
Go to the 3-1 Trunk Group screen.
b.
Assign the Intercept Destination for the trunk group for each time mode.
c.
Click Apply to save the changed data.
Document Version 2.1 2008/04
5.6 KX-TD500 PBX Programming for Inband Integration
Installation Manual 151