Pound Unit; End Unit; Print Menu; Reset - OHAUS TD32PE Instruction Manual

EN-22

3.7.3 Pound Unit

Set the status.
OFF = Disabled
ON = Enabled

3.7.4 End Unit

Advance to the next menu.
3.8 Print Menu (appears only with RS232 option installed)
Enter this menu to define printing parameters. Default settings are bold.

3.8.1 Reset

Set the Print menu to factory defaults.
NO = not reset.
YES = reset.
NOTE: If the Legal for Trade menu item is set to ON, the following
settings are not reset: Stable, Auto Print

3.8.2 Baud

Set the Baud rate.
300 = 300 bps
600 = 600 bps
1200 =1200 bps
2400 = 2400 bps
4800 = 4800 bps
9600 = 9600 bps
19200 = 19200 bps

3.8.3 Parity

Set the data bits and parity.
7 EVEN = 7 data bits, even parity.
7 Odd = 7 data bits, odd parity.
7 NONE = 7 data bits, no parity.
8 NONE = 8 data bits, no parity.
a
Reset No, Yes
Baud Rate: 300, 600, 1200, 2400, 4800,
9600, 19200
Parity: 7 Even, 7 Odd, 7 None, 8 None
1 or 2
Stop Bit
Handshake: Off, XON/XOFF
Off, On
Stable Only
Auto Print Off,
On Stable (-> Load, Load and Zero),
Interval (-> 1...3600),
Continuous
Content Result (->Off, On, NUM)
Gross (->Off, On)
Net (->Off, On)
Tare (->Off, On)
Unit (->Off, On)
Mode (->Off, On)
Info (->Off, On)
Layout Format (->Multiple, Single)
Feed (->Line Feed, 4 Line Feed, Form Feed)
End Print Exit PRINT menu
3000 Series Indicators
UNIt
lb