Installation; Unpacking; External Connections; Scale Base To Indicator - OHAUS TD32PE Instruction Manual

3000 Series Indicators
2.

INSTALLATION

2.1

Unpacking

Unpack the following items:
• Indicator
• AC Adapter
• Column Connector
• Instruction Manual
 Load Cell Connector
2.2

External Connections

2.2.1 Scale Base to Indicator

Connect the load cell cable to the indicator as shown below:
Note: To connect TD32PE to other bases, a loadcell connector needs to be soldered as shown above.

2.2.2 AC Power to Indicator

Connect the AC Adapter to the power receptacle (Figure 1-1, item 3), then plug the AC Adapter into an electrical outlet.
Pin Connection
1 +EXE
2 +SEN
3 +SIG
4 GND
5 -SIG
6 -SEN
7 -EXE
2
1
EN-9