Viewing Current Alarms / Clearing Current Alarms / Alarm History; Clearing Alarm History / Manifold Rotate - Rheem IKONIC RTGH-S11i Manual

USER INTERFACE AND OPTIONS
VIEWING CURRENT ALARMS
This water heater can display up to 4 active alarms. Us-
ers may clear these alarms on the user interface by com-
pleting the following steps.
1. Press the "SERVICE" button
SET POINT
BACK
SETTINGS
2. Press the "▼" or "▲" button until "Current Alarms" is
displayed, and press "ENTER" to confirm.
Current Alarms
BACK
SETTINGS
3. Press the "▼" or "▲" button and the LCD displays
current alarm 1 to 4.
CLEARING THE CURRENT ALARMS
1. Redo from above step.2, and press the "▼" or "▲"
button until "Clear Alarms?" is displayed. Press "EN-
TER" to confirm.
Clear Alarms?
BACK
SETTINGS
ENTER
STATUS SERVICE MODE
ENTER
STATUS SERVICE MODE
ENTER
STATUS SERVICE MODE
33 IKONIC Tankless Water Heater Service Manual
2. Press the "▼" or "▲" button until "Yes" is displayed,
and press the "ENTER" To exit this setting, press
"BACK" until the initial screen is displayed.
ALARM HISTORY
This water heater can display up to 6 previously observed
alarms. Users may clear these alarms on the user inter-
face by completing the following steps:
1. Press the "SERVICE" button.
Clear Alarms?
BACK
SETTINGS
2. Press the "▼" or "▲" button until "Alarm History" is
displayed. Press "ENTER" to confirm.
3. Press the "▼" or "▲" button, the LCD displays previ-
ously observed alarm 1 to 6.
SET POINT
BACK ENTER
SETTINGS STATUS SERVICE MODE
Yes
BACK ENTER
SETTINGS STATUS SERVICE MODE
ENTER
STATUS SERVICE MODE
SET POINT
BACK ENTER
SETTINGS STATUS SERVICE MODE
Alarm History
BACK ENTER
SETTINGS STATUS SERVICE MODE