Rheem IKONIC RTGH-S11i Manual page 34

IKONIC Tankless Water Heater Service Manual
USER INTERFACE AND OPTIONS
CLEARING ALARM HISTORY
1. Redo from above step.2, and press the "▼" or "▲"
button until "Clear History?" is displayed, and press
"ENTER" to confirm.
BACK
SETTINGS
Clear History
BACK
SETTINGS
2. Press the "▼" or "▲" button until "Yes" is displayed,
and press the "ENTER" button. To exit this setting,
press "BACK" button until the Home screen is dis-
played.
BACK
SETTINGS
SET POINT
ENTER
STATUS SERVICE MODE
ENTER
STATUS SERVICE MODE
Yes
ENTER
STATUS SERVICE MODE
34
MANIFOLD ROTATE
This tankless water heater can be set to rotate the "Man-
ager" unit in a manifold system by completing the follow-
ing steps:
1. Press the "SERVICE" button on the instance 01 heat-
Current Alarms
er.
BACK
SETTINGS STATUS
2. Press the "▼" or "▲" button until "Manifold rotate?"
is displayed, and press the "ENTER" button.
3. The factory setting is "No". Press the "▼" or "▲" but-
ton until "Yes" is displayed, and press the "ENTER"
button. To exit this setting, press "BACK" button until
the Home screen is displayed.
ENTER
SERVICE MODE
SET POINT
BACK ENTER
SETTINGS STATUS SERVICE MODE
Manifold Rotate
BACK ENTER
SETTINGS STATUS SERVICE MODE
S