Oil Drain Manifold, Drain Flush And Drain Valve Components - Frymaster Dean Super Runner Series Service & Parts Manual

2.5.1 Oil Drain Manifold, Drain Flush and Drain Valve Components (cont.)
ITEM PART #
1 8233565
* 8233566
2 8121524
3 8130784
4 8130829
5 8130748
6 2001827
7 8130659
8 8090884
* 8160544
9 8130686
10 8130165
11 8130672
12 8101669
13 8101069
14 8101668
15 1061401
16 2001617
17 2102029
18 2104727
* 8233440
* 8090885
* 8090843
* 8160547
19 8072104
20 8090842
21 8160220
22 2001257
23 8102127
24 8102052
* 8102442
* 8101338
* 2103902
* 1061417SP
* 8130138
* 8130716
* 8130406
25 8102126
* 8121226SP
* 8130392
* 8121681
* 8130870
* 8130669
* Not Illustrated
Note: In Mar. 2003 SR42G went to 1" drain valves.
FRYMASTER DEAN MILLIVOLT GAS FRYERS
CHAPTER 2: PARTS LIST
Elbow, with Bracket (LH)- 1-¼"- UFF 50
Elbow, with Bracket (RH)- 1-¼"- UFF 50
Drain Pipe, Left Side (Use 823-3418 for Chili's)
Drain Pipe, Right Side 1 ½" x 6"
Elbow, 1-½" NPT 75°
Tee, 1-½" NPT x 1-¼" BM With Handle Bracket
Drain Manifold Tube- 1-½" x 13-¼"
Pipe Cap, 1-½"
Nut, Slip Joint- 1-½"
O-ring (Slip-Joint Nut)
Bell Reducer, ½" NPT x 1-½"
Elbow, Street- ½" NPT 90°
Nipple, ½" NPT x 8" BM
Adapter, ⅝" O.D. x ½"- Female
Flex Line, ⅝" x 29-½ "
Adapter, ⅝" O.D. x ½"- Male
Drain Valve Components
Bracket, Microswitch (Optional On SUFF/UFF Units)
Washer, Drain Valve (Use Without Microswitch)
Bracket, Activator- Microswitch (Also Used On Valves Without Microswitch As A
Handle-Stop)
Handle (Actuator), Drain Valve
Handle, Push/Pull- Drain (With Cap)
Washer, ⅜" x 1" x .083"
Pin, Cotter
Cap, Vinyl-Red
Microswitch (Optional On SUFF/UFF Units)
Nut, Nylock- #4-40 (Microswitch To Bracket)
Insulation, Microswitch
Retainer, Nut
Drain Valve, 1-½" Full Port (With Washers & Nut)
Drain Valve, 1-¼" (1" Standard Port)
Handle, Valve Lever
Drain Valve, 1" SM20G, SR42G, ESG35T see note below
Handle, Valve Lever (For
Drain Valve Assembly 1" RH and LH
Nipple, 1" NPT x Close (To Adapt To 1-¼" Extended Drain Nipple)
Bushing, 1" NPT x 1-¼" BM (To Adapt To 1-¼" Extended Drain Nipple)
Coupling, 1-¼" NPT x 2" (To Adapt To 1-¼" Extended Drain Nipple)
Drain Valve, 1-¼" Full-Port (Use 106-2439 for Assembly)
Nipple, Drain- 1-¼" Painted- SM Series Fryers (use
Nipple, Drain- 1-¼" NPT x 8" BM- All SR Series Fryers except SR42 w/ 1"
Nipple, Drain- 1-¼" x 5" NPT
Nipple, Drain- 1-¼" x 10" NPT
Nipple, Drain- 1" x 8" (Use
COMPONENT
8101338 Only)- SM20G
8121668 for 5"-SR42) (Use 8130605 for 9"- SR62)
2-17
8130276 for SM20)