Features Overview - Viking E-1600-SS-IP Product Manual

Viking model LV-1K
shown (not included),
see DOD 246
Connect to Optional
Strobe Light, LV-1K, etc.
|
OR
|
Viking model SL-2
shown (not included),
see DOD 242
Note: The gel-filled (water-tight) butt connectors are designed for insulation displacement on 19-26 gauge wire with a
maximum insulation of 0.082 inches. Cut off stripped wire ends before terminating.

Features Overview

Rear (PCB) View of E-1600-IP Series
Emergency Phone
Optional 2 Amp Relay
Output Contacts
(2A@30VDC / 250VAC max)
N.C. (Gray)
COM. (Blue)
N.O. (Yellow)
3 Gel-Filled Butt
Connectors (included)
- Black
+ Red
Black
Black
Red
Red
Yellow
Yellow
- Black
+ Red
4
PoE LAN Port 10/100, PoE Class 1
(<4 Watts): Connect to your LAN via
RJ45 plug and CAT5 or greater
twisted pair wire.
MAC Address Label: The MAC
address is a unique 12 digit number
used by routers to send network traffic
to the correct IP address.
Yellow Network Status LED: Lights
steady to indicate power and data
link. Blinks to indicate network activity.
Green Unit Status LED
LED
Help Switch
Info Switch (optional)
Speaker
Microphone