Table of Contents
Advertisement
Removing and installing components
NOTE:
The images in this document may differ from your computer depending on the configuration you ordered.
Recommended tools
The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Base cover
Wireless card
WWAN
M.2 2230/2280 Solid-state
drive thermal plate
M.2 2230 Solid-state drive
Dummy Hard-drive filler
Hard drive
Hard-drive bracket
4-Cell battery
6-Cell battery
Assembly inner frame
Screw type
Captive
Captive
M2x3
M2x2
M2x4
M2x4
M2x4
M3x3
M2x4
M2x4
M2x3
Quantity
9
1
1
2
1
4
4
4
3
4
17
Removing and installing components
Screw image
2
11
Advertisement
Table of Contents
