Table of Contents
Advertisement
Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. . Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
NOTE:
Repeat step 1 to step 4 to install any other memory modules in your computer.
NOTE:
For 4G/5G WWAN configuration, the re-usable absorbers need to be transferred to the DIMM1/DIMM2 slot
while replacing the system board.
Next steps
1. Install the
base
cover.
2. Install the
microSD
card.
3. Install the
SIM
tray.
4. Follow the procedure in
Dummy hard-drive filler
Removing the dummy hard-drive filler
Prerequisites
1. Follow the procedure in
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
37
Advertisement
Table of Contents
