Table of Contents
Advertisement
Steps
1. Align the notch on the M.2 2280 solid-state drive with the tab on the solid-state drive slot.
2. Slide the M.2 2280 solid-state drive into the M.2 2280 solid-state drive slot on the system board.
3. Replace the single screw (M2x4) that secures the solid-state drive to the system board.
Next steps
1. Install the
microSD
card.
2. Install the
SIM
card.
3. Install the
base
cover.
4. Follow the procedure in
Removing the 2230 solid-state drive—SSD2 slot
Prerequisites
1. Follow the procedure in
NOTE:
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
NOTE:
To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.
2. Remove the
SIM
card.
3. Remove the
microSD
4. Remove the
base
cover.
About this task
NOTE:
Depending on the configuration ordered, your computer may support a 2230 solid-state drive, or a 2280 solid-state
drive in M.2 slot.
NOTE:
This procedure applies only to computers shipped with a 2230 solid-state drive installed in M.2 slot.
After working inside your
Before working inside your
card.
computer.
computer.
Removing and installing components
31
Advertisement
Table of Contents
