Table of Contents
Advertisement
About this task
The following images indicate the location of the 6-cell (97 Wh) battery and provide a visual representation of the installation
procedure.
Steps
1. Align the screw holes on the 6-cell battery with the screw holes on the palm-rest and keyboard assembly.
2. Replace the four screws (M2x4) that secure the 6-cell battery to the palm-rest and keyboard assembly.
3. Connect the battery cable to the connector on the system board.
Next steps
1. Install the
base
cover.
2. Install the
microSD
card.
3. Install the
SIM
tray.
4. Follow the procedure in
Battery cable
Removing the 4-cell battery cable
Prerequisites
1. Follow the procedure in
2. Remove the
SIM
card.
3. Remove the
microSD
After working inside your
Before working inside your
card.
computer.
computer.
Removing and installing components
47
Advertisement
Table of Contents
