Pkm IN 5-FZ Instruction Manual page 46

zone.
 While using unsuitable cookware, the cooking zone does not heat up. The
display goes off automatically after 1 minute even if you have not placed
suitable cookware on the cooking zone.
3.5 How to stop cooking
1. Touch the
SELECTION OF COOKING ZONE
cooking zone you want to switch off.
2. Switch off the relevant cooking zone by setting the - sensor
to 0. Check that the indicator displays 0 and then H.
3. Switch off the appliance with the O
4. Beware of the hot surfaces of the cooking zones! An H
indicates which cooking zones are still hot. The H
disappears as soon as the relevant cooking zone has cooled
down. You can use the H for saving energy when starting a
new cooking procedure on a cooking zone which is still
warm/hot.
3.6 Flexible cooking zones
You can place the cookware on any place within the defining lines of the flex-
zones. When activating the bridge-function, the cookware must have a minimum
diameter of 210 mm for optimum result.
1. Touch the
SELECTION OF COOKING ZONE
cooking zone which is intended for operating in flex-mode.
The indicator flashes.
2. Touch the
SELECTION OF FLEX
mode is activated. The power level indicators of the front and back cooking
zone indicate the same power level.
-sensor of the
/O -sensor.
N FF
-sensor of the
- -sensor. The indicator flashes and the flex-
ZONE
46