Pkm IN 5-FZ Instruction Manual page 45

 Always lift your cookware, when you want to move it on the glass ceramic. Do
not push cookware as you may scratch the glass ceramic.
The base of cookware must have a minimum diameter relevant to the diameter of
the cooking zone you use the cookware on.
3.4 How to start cooking
1. Touch the ON/OFF sensor. When the power is on, a
beep sounds once; the display indicates - or --. The
appliance is in stand-by mode now..
2. Place a cookware on the desired cooking zone. Always
keep the bottom of the cookware as well as the cooking
zone clean and dry.
3. Select the power level by touching the
COOKING ZONE
4. Adjust the power level using the +/- sensors (a), or slide (b), or touch a point
on the line (c).
The display indicates
 You have not placed the cookware on the correct zone, or
 You use unsuitable cookware, or
 You use cookware which is too small or not centred properly on the cooking
sensor. The indicator flashes.
↔ indicator of the power level alternately.
SELECTION OF
45