Pkm IN 5-FZ Instruction Manual page 38

L (mm) W (mm)
770 520
 The hob must be ventilated properly. The air inlet (D) and outlet (E) must
never be blocked or covered. Always keep the appliance in proper condition.
The top closing edge of the cabinet (X) must not be flush with the installation
opening (1). Install the closing edge in offset positioning (2) or bevel the closing
edge (3).
A(mm) B(mm) C(mm)
760
WARNING! Min. safety distance between hob and a cupboard above =
76 cm.
Ensure before the installation
 The worktop must be rectangular and plane and made of heat-resisting material.
Structural elements should not interfere with the installation area.
 The installation must meet the safety requirements as well as the legal rules and
regulations.
H (mm) D (mm)
62 58
50 min. 30 min. Air inlet Air outlet 10 mm
A (mm)
740
D
38
B (mm) X (mm)
490 50 min.
E