Brother MFC-T4500DW Online User's Manual page 590

Level 1 Level 2
Setup Receive Memory
Receive
Fax Rx Stamp
Report Setting XMIT Report
Journal
Period
Print Document -
Remote Access -
Dial Restriction Dial Pad
Address Book
Shortcuts
Remaining Jobs -
Miscellaneous Caller ID
Type
Fax Mode
[Network]
[Settings] > [All Settings] > [Network]
Level 1 Level 2
Wired LAN TCP/IP
Ethernet
Wired Status
MAC Address
Level 3 Descriptions
- Set the machine to forward fax messages, to store incoming
faxes in the memory (so you can retrieve them while you are
away from your machine), or the cloud service.
If you select Fax Forward, or Forward to Cloud, you can turn on
the Backup Print safety feature.
- Print the received time and date on the top of received faxes.
- Select the initial setup for the Transmission Verification Report.
- Set the interval for automatic printing of the Fax Journal.
If you select an option other than Off and Every 50 Faxes, you
can set the time for the option.
If you select Every 7 Days, you can set the day of the week.
- Print received faxes stored in the machine's memory.
- Set your own code for Remote Retrieval.
- Set the machine to restrict dialling when using the dial pad.
- Set the machine to restrict the dialling when using the Address
Book.
- Set the machine to restrict the dialling when using a Shortcut.
- Check which scheduled jobs are in the machine's memory and
cancel selected jobs.
- Switch the mode if Caller ID cannot be displayed normally.
- Select the transmission process when sending/receiving the
faxes manually.
Level 3 Level 4 Descriptions
BOOT Method -
IP Address
-
Subnet Mask -
Gateway -
Node Name -
WINS -
Configuration
WINS Server
-
DNS Server -
APIPA -
IPv6 -
- -
- -
- -
Select the Boot method that best suits
your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration mode.
Specify the IP address of the primary or
secondary WINS server.
Specify the IP address of the primary or
secondary DNS server.
Set the machine to allocate the IP
address from the link-local address range
automatically.
Turn the IPv6 protocol on or off.
Select the Ethernet link mode.
View the current wired status.
View the machine's MAC address.
583