Page 1
CHN-ENG Version 0 Read the Product Safety Guide first, then read this guide for the correct installation procedure. Keep this guide next to your machine for quick reference. MFC-T920DW You must follow steps to complete the setup. NOTE • Save all packing materials and the box in case you must ship your Unpack the machine and check the components machine.
Page 2
The bottle is self-standing and the ink fills automatically until the bottle is empty. To fill the ink tank faster, squeeze the bottle on both sides. Remove the film and tighten the cap firmly. Remove the nozzle cap and insert the bottle nozzle firmly into the ink tank so that the ink does not spill.
Page 3
Connect your Brother machine and computer/mobile device to Connect your computer or mobile device the same network. Install Brother software to use your machine. Visit one of the following websites: Follow the on-screen instructions. For Computers: For Mobile Devices: For Wired Network Connection and USB Connection: Use the correct port (based on the cable you are using) inside the machine, as shown.
Page 4
4. Press Mono Start or Color Start. Machine Settings The machine’s settings are set from the application (Brother iPrint&Scan or Brother Utilities) on your computer or mobile device. Important Notice for Network Security: The default password to manage this machine’s settings is located on the back of the machine and marked “Pwd”. We recommend immediately changing the default password to protect your machine from unauthorized access.