Brother MFC-T4500DW Online User's Manual page 33

Home > Paper Handling
Paper in Tray #1
Load A3, Ledger, or Legal Size Paper in Tray #1
• If the [Check Paper] setting is set to [On] and you pull the paper tray out of the machine, a message
appears on the LCD asking if you want to change the paper type and paper size.
• When you load a different paper size in the tray, you must change the Paper Size setting in the machine or
the paper size setting on your computer.
Doing this enables the machine to automatically feed paper from the appropriate tray if Auto Tray Select
has been set in the machine or printer driver.
1. If the paper support flap (1) is open, close it, and then close the paper support (2).
2
2. Pull the paper tray completely out of the machine as shown by the arrow.
3. Rest the tray on a flat surface.
Push the green slider to the left and then extend the tray until it locks into place.
> Load Paper > Load Paper in the Paper Tray
1
> Load A3, Ledger, or Legal Size
26