Configure Ldap Authentication Using Web Based Management - Brother MFC-T4500DW Online User's Manual

Home > Security > Use LDAP Authentication
Management

Configure LDAP Authentication Using Web Based Management

1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
3. If the machine prompts you for a password, type it, and then click
4. Click the Administrator tab.
5. Click the User Restriction Function menu in the left navigation bar.
6. Select LDAP Authentication.
7. Click Submit.
8. Click the LDAP Authentication menu in the left navigation bar.
9. Configure the following settings:
Option
Storage Fax RX Data
Remember User ID
LDAP Server Address
Get User's Home Directory
LDAP Server Port
LDAP Search Root
Attribute of Name (Search
Key)
If this option is not available, update your machine's firmware. Go to your model's Downloads page on the Brother Solutions Center
1
at support.brother.com.
10. Click Submit.
Related Information
• Use LDAP Authentication
> Configure LDAP Authentication Using Web Based
Description
Select this option to store incoming fax data. You can print all incoming fax
data after you log on to the machine.
Select this option to save your User ID.
Type the IP address or the server name (for example: ldap.example.com)
of the LDAP server.
1
Select this option to obtain your home directory as the Scan to Network
destination.
Type the LDAP server port number.
Type the LDAP search root directory.
Type the attribute you want to use as a search key.
.
364