Setup Your Electric Adjustable Desk; Treadmill To Desk Setup - LifeSpan Workplace SD120 Owner's Manual

Setup Your Electric Adjustable Desk

Treadmill to Desk Setup

A. Position the pre-assembled treadmill as shown below.
B. Once in position, stand on the treadmill and see if you feet are too close
to the hood. If so, reposition the treadmill further under the desk.
Treadmill
Connections,
Rear View
7
9 Pin
Data Cable
C. Connect the 9 Pin Data Cable(22) from the Console into the treadmill
Console Port and tighten the thumb screws.
D. Plug the Power Cord into the treadmill Power Receptacle and into a
wall outlet.
E. Turn the treadmill Power Switch on.
22
Lift
22
Roll Forward
D
Power Switch
Power Receptacle
Console Port
Be sure all
connectors
are plugged
Note:
in prior to
connecting the
power cord