Table of Contents
Advertisement
Treadmill/Bike Desk Operation
Custom Settings
• Tap the Set Button to enter Settings mode.
• Press the up or down arrows to highlight your choice selection.
• Press the Set Button to scroll down the list to the next item.
• Press the Pause/Stop button to exit Settings mode.
Intelli-Guard — Intelli-Guard ON/OFF. (Treadmill only)
Buzzer — Turns off the normal treadmill beep that happens at every button
press.
Speed Resume — Controls whether, after a Pause, the treadmill resumes
the most recent walking speed, or resets to 0.4 mph. If ON, the speed resets
to 0.4 mph. (Treadmill only)
Speed Limit — The maximum speed of the treadmill.
Adj. Desk — The default setting of Present lets the desk height be adjusted.
The None setting keeps the desk at its current height and prevents it from
being adjusted.
BT ID No. — You can change the last two digits of your console's Bluetooth
Identification Number. In the event that you have two or more SC110/SC120
consoles in the same room, and both have the same BT ID No, you can
change one of them to be different. Your number options are from 00-99.
Sleep Mode — Set the amount of minutes before the console/treadmill go to
sleep. Can set from 0 - 99 minutes.
Preset — The P1, P2, and P3 preset buttons can be set for desktop height
or speed. Preset desktop heights can be set to any level. Preset treadmill
speeds cannot be changed. The default values for preset speeds are
P1=0.4 mph, P2=1.2 mph, and P3=2.0 mph.
30
Advertisement
Table of Contents
