Table of Contents
Advertisement
Bike Desk Troubleshooting
Troubleshooting
This bike desk has been designed and manufactured to be reliable and easy
to use. However, if you have a problem, these troubleshooting steps may
help you find the cause.
Problem: The console is erratic or not lighting up.
Solution: Check to make sure the bike is properly plugged in. Make sure the
connectors on the bike and under the desktop are fully plugged in. If the
problem persists contact LifeSpan customer service.
Problem: "UART" appears in the display.
Solution: Turn the bike desk power switch off. Unplug and re-plug the
connections made in Step C on page 23. Make sure the thumb screws are
properly tightened. Unplug the bike and plug it back in and check to see if it
functions properly.
Problem: "E32" appears in the display.
Solution: Check to make sure the motor wires from the Left and Right
Motorized Legs are properly connected into the Electronic Control Box. See
page 17. Run calibration by pressing and holding the height
adjustment
buttons simultaneously for three seconds.
Problem: The desktop surface is not level.
Solution: Check to make sure the base feet are on a level surface. Run
calibration by pressing and holding the height adjustment buttons
simultaneously for three seconds.
If you experience any other error codes, please call LifeSpan Customer
Support.
34
Advertisement
Table of Contents
