Quick Start; Initial Setup Mode - LifeSpan Workplace SD120 Owner's Manual

Treadmill/Bike Desk Operation

Quick Start

• Make sure the safety key is set in place.
The display will show a warning image if the Safety Key is
not engaged. Please make sure that the Safety Key is fully
Note:
engaged. It is possible the display will not show a warning
when just partially engaged.
• Press and hold the Start Button to turn on console screen.
• Enter settings for Initial Setup Mode.
• Press the up and down arrows to adjust the desk height.
• Press and hold the Start Button for 2 seconds to start the treadmill. If
using a desk bike this will start recording your exercise data).
• Use the up and down arrows to adjust speed or pedal resistance.
• Press the Pause/Stop button to stop treadmill belt, and pause the
exercise program.
• Press the Pause/Stop button to exit the program and to see your
exercise summary.
• Press the Pause/Stop button to exit exercise summary and enter
standby mode.
• Press and hold the Pause/Stop button to turn off the Console.

Initial Setup Mode

The first time you turn on the console you will need to set the calendar, time,
and some basic physical information about yourself.
Year: Use the up and down buttons to select year. Press Set.
Month: Use the up and down buttons to select month. Press Set.
Day: Use the up and down buttons to select day. Press Set.
Time: Use the up and down buttons to select time. Press Set.
Units: Use the up and down buttons to select Imperial or Metric. Press Set.
28