Safety Information - Warning - Owner Must Read And Understand - H&S 3108 Operator's Manual

Action rake
Hide thumbs Also See for 3108:
Table of Contents

Advertisement

TRACTOR:
This operators manual uses the term "Tractor" when identifying the power source.
BEFORE YOU ATTEMPT TO OPERATE THIS EQUIPMENT, READ AND STUDY THE FOLLOWING
INFORMATION. IN ADDITION, MAKE SURE THAT EVERY INDIVIDUAL WHO OPERATES OR WORKS
WITH THIS EQUIPMENT, WHETHER FAMILY MEMBER OR EMPLOYEE, IS FAMILIAR WITH THESE
SAFETY PRECAUTIONS.
I
f the machine becomes clogged or for servicing, Stop the tractor engine, remove ignition key
and allow all mechanisms to stop.
Before cleaning or working on the machine, completely disengage the tractor hydraulics.
IF THE RAKE ARMS ARE IN THE RAISED POSITION, MAKE SURE THE HYDRAULIC
TRANSPORT LOCK VALVES TO LOCK THE RAKE ARMS ARE IN THE CLOSED POSITION
BEFORE DISCONNECTING THE HYDRAULIC HOSES.
DO NOT attempt to perform maintenance or repair with tractor running and hydraulic hoses connected to the
tractor.
DO NOT ALLOW PERSONNEL OTHER THAN THE QUALIFIED OPERATOR NEAR THE RAKE.
DO NOT step up on machine at any time.
DO NOT allow minors to operate or be near the machine.
Stay clear of rake when raising or lowering main rake beams.
Stay clear of hydraulic lines, they may be under extreme pressure or heat.
For transport and storage, always make sure that the transport lock valves are in the closed position.
H&S Manufacturing always takes the operator and his safety into consideration and guards exposed
moving parts for their protection. However, some areas cannot be guarded or shielded in order to assure proper
operation. In addition, the operators manual and decals on the machine itself warn you of further danger
and should be read and observed closely.
ATTENTION - BE ALERT - YOUR SAFETY IS INVOLVED
W A R N I N G
TO PREVENT SERIOUS INJURY OR DEATH
Study The Above Safety Rules
-10-

Advertisement

Table of Contents
loading

Table of Contents