Table of Contents
Advertisement
2. Safety notes
> Before using the medical device for the first time, store it at room temperature for 24 hours.
> Always ensure the correct operating conditions and cooling function.
> Always ensure that sufficient and adequate cooling is delivered and ensure adequate suction
(except for tips where no coolant is used).
> In case of coolant supply failure, the medical device must be stopped immediately (maximum operating
time without coolant is 30 seconds). The exception are applications where no coolant is used
(e.g. endodontics). Maximum operating time without coolant is 2 minutes.
> Check the medical device for damage and loose parts each time before using (e.g., tip, handpiece cap).
> Do not operate the medical device if it is damaged.
> Perform a test run each time before using.
> Do not look directly into the optic outlet.
> Run the rinse function for the dental unit once per day.
> Replace damaged or leaking O-rings immediately.
> Do not twist, kink or squeeze the supply hose (risk of damage).
10
Advertisement
Table of Contents
