Table of Contents
Advertisement
4. Safety notes
General
> Before using the foot control for the first time, store it at room temperature for 24 hours.
> Check the foot control for damage and loose parts before every use.
> Do not use the foot control if it is damaged.
> Replace the foot control if the resistance of the pedal is noticeably reduced.
> Never touch the patient and the connections for the foot control on the control unit simultaneously.
> The ESD spring contact on the bottom of the foot control must be in contact with the ground during operation.
ESD is the abbreviation for "electrostatic discharge".
The foot control is approved for operation in potentially explosive atmospheres (AP).
12
Advertisement
Table of Contents
