2. Safety notes
> Before using the medical device for the first time, store it at room temperature for 24 hours.
> The operation of the medical device is permitted only on supply units which correspond to the standards
IEC 60601-1 (EN 60601-1) and IEC 60601-1-2 (EN 60601-1-2).
> Always ensure the correct operating conditions and coolant function.
> Always ensure that sufficient and adequate coolant is delivered and ensure adequate suction.
> In case of coolant supply failure, the medical device must be stopped immediately.
> Check the medical device for damage and loose parts each time before using (e.g., push-button).
> Do not operate the medical device if it is damaged.
> Only attach the medical device onto the motor when the motor is at a complete standstill.
> Do not activate the push-button of the medical device during operation. This leads to detachment of the
rotary instrument and/or makes the medical device hot.
> Perform a test run each time before using.
> Avoid overheating at the treatment site.
9