Room Monitor - Panasonic KX-TG6700C Operating Instructions Manual

TG6700C(e).book Page 53 Thursday, May 25, 2006 11:57 AM

Room monitor

This feature allows you to monitor the
room where a unit is located. The
monitored unit does not ring, allowing you
to easily monitor a baby's room, for
example, from different areas of the
house.
Note:
L You can place the handset on the base
unit or charger while monitoring using
the speakerphone.
Setting room monitor
To use the room monitor feature, you need
to set the destination unit to be monitored
beforehand.
– "Off" (Default): denies access from
other units.
– "On": allows the unit to be monitored.
Turn on/off the handset's room monitor
feature
Handset
1
{MENU} i {0}{9}
2
Select the desired setting.
3
{SAVE} i {OFF}
Turn on/off the base unit's room
monitor feature
Handset
1
{MENU} i {0}{*}{3}
2
Select the desired setting.
Multi-unit Operation
3
{SAVE} i {OFF}
Monitoring a room
Important:
L Before using this feature, set room
monitor of the destination unit to "On" to
allow access by other units.
L If you receive an outside call while
monitoring a room, you hear 2 tones
(page 36). To answer the call with the
handset, press {LINE1} or {LINE2} that
is flashing on the handset. To answer the
call with the base unit, press {LINE1} or
{LINE2} that is flashing on the base unit.
Handset
1
{INTERCOM} i {MONITOR}
2
To page the base unit, press {0}.
To page another handset, enter its
extension number ({1} – {8}).
L You can listen to the audio.
3
Press {OFF} to stop monitoring.
Base unit
1
{INTERCOM} i {MUTE}
2
To page a specified handset, enter its
extension number ({1} – {8}).
L You can listen to the audio.
3
Press {INTERCOM} to stop monitoring.
53