Table of Contents
Advertisement
TG6700C(e).book Page 54 Thursday, May 25, 2006 11:57 AM
Multi-unit Operation
Registering a handset
The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base unit,
register the handset.
Important:
L If you have already deregistered the
handset, perform steps 2 and 3 only.
1
Handset:
{MENU} i {0}{0}{1}
2
Base unit:
Press and hold {INTERCOM} until the
IN USE indicator flashes.
L After the IN USE indicator starts
flashing, the rest of the procedure
must be completed within 1 minute.
3
Handset:
Press {OK}, then wait until a beep
sounds.
4
{OFF}
Registering an additional handset
See page 5 for information on the available
model and extension numbers.
Start from step 2.
Deregistering a handset
Handset
1
{MENU} i {0}{0}{2}
2
{3}{3}{5} i {OK}
54
Advertisement
Table of Contents
