BenQ RP7501K User Manual page 39

Display settings
Leave the android system and connect to other input sources like VGA, HDMI, OPS.
Then go to Display.
• Press /// on the remote control and press OK to confirm or directly click an
item.
• Press on the remote control or click a blank area outside the menu to exit the
menu.
• Press/on the remote control and press OK to adjust image.
Menu
Aspect ratio
• The display automatically enters energy saving mode when no one is detected within
the sensor's range.
• The display automatically turns off when no one is detected within the sensor's range
for a long period of time.
Adjust settings (VGA-only)
Use the H Position, V Position, Clock, and Phase functions to manually adjust the
image.
Menu
H Position
V Position
Press/on the remote control or click an aspect ratio.
Options are 16:9 or PTP. You can also select Auto to adjust the
image.
Press to move the screen to the left or right.
Press OK on the remote control or click the switch to lock or
unlock the remote control IR sensor on the front panel of the
display.
Menu operations
Description
Description
35