Parts identification
COURSE
CLEAN
DRY
CHARGE
STATUS
A Protective cap
B System outer foil
C Inner blades
D Main body
1 System outer foil release
buttons
2 Finger rest
3 Pivot action selector
COURSE
SELECT
4 0/1 switch
5 Lock ring
6 LCD panel
7 Appliance socket
8 Trimmer
9 Trimmer handle
E Adaptor (RE7‑51)
Power cord
Appliance plug
F Self‑cleaning recharger
(Referred to as the
"Recharger".)
Detergent cartridge
Water tank
Socket
Water tank cap
CLEAN lamp
Operating environment for the self-cleaning
recharger
Operating temperature:
Operating humidity:
•
If you use the self‑cleaning recharger in temperatures outside the
above range, the following problems may occur.
-
The time it takes to charge the shaver increases.
-
The recharger stops functioning.
-
The lifespan of the rechargeable battery shortens. (Only when
you use the recharger in lower temperatures.) In this case, the
indicators on the LCD panel will blink twice every second.
•
If the indicators on the LCD panel do not glow, wait for a short
while until it glows.
•
Depending on the environment, the shaver may not dry even if
you select a course that includes the "Dry" function. In this case,
wipe off any drops of water with a dry cloth.
DRY lamp
CHARGE lamp
STATUS lamp
SELECT button
Cleaning tray
Water level
Case
H Cleaning brush
I Oil
15‑35 °C
Less than 95%
3