#
Item/Caption
Type
1
LEDs
—
2
RST
—
3
PWR
2-pin
terminal
4
ETH2
SFP cage
5
ETH1
RJ45
6
ETH0
RJ45
7
USB
USB-A
8
SERIAL & I/O
14-pin
terminal
9
ANT0, ANT1,
SMA
ANT2, ANT3
female
10
WIFI1
RP-SMA
female
11
Grounding
M3
screw
12
SIM slots
Mini SIM
microSD slot
microSD
13
Wall clips
—
Description
Status LED indication; see Chapter 2.12.
Button to reboot the router or to restore the default
configuration; see Chapter 2.13.
Power supply socket; see Chapter 2.6.
SFP cage socket for modules with speed up to 10 Gbps;
see Chapter 2.5.
1 Gb Ethernet connection for the second LAN; see Chap-
ter 2.3.
1 Gb Ethernet switched connection (with four ports) for the
first LAN; see Chapter 2.3.
USB 2.0 host port; see Chapter 2.10.
RS232, RS485, CAN bus, binary input, and binary output
interfaces. See Chapter
ter
4.7
for I/O parameters, and Chapter
face parameters.
Cellular module antenna connectors. ANT1 and ANT3
are shared with GNSS. See Chapter
mation, Chapter
Chapter
4.5
for GNSS parameters.
Connectors for the WiFi antennas. See Chapter
more information and Chapter
Pay attention to proper grounding; see Chapter 2.6.
Two Mini SIM card slots; see Chapter
mation and Chapter
MicroSD card slot; see Chapter 2.11.
Wall mounting clips, included as standard accessories;
see Chapter 1.8.
Table 1: Hardware Overview of the Router
6
ICR-4461
2.8
for more information, Chap-
4.8
2.2
4.4
for cellular module parameters and
4.6
for WiFi parameters.
2.1
4.4
for cellular module parameters.
for serial inter-
for more infor-
2.2
for
for more infor-