Product Overview; Product Introduction - Advantech ICR-4461 User Manual

5g industrial router
Hide thumbs Also See for ICR-4461:
Table of Contents

Advertisement

1. Product Overview

1.1 Product Introduction

The ICR-4461 is an Ultra-high-speed 5G NR (New Radio) Router & Powerful Edge Com-
puting Gateway focused on the global market, including the NAM region.
Thanks to the ultra high-speed of data transfer, up to 3.4 Gbps for download and
900 Mbps for upload, is this router an ideal solution for demanding IoT applications such
as industrial routers and gateways, digital signage, industrial computers, and tablets, etc.
For maximal performance on the cellular network, the 4x4 MIMO technology is used. Two
antennas for GNSS can be connected to the router (shared SMA connectors with cellular
antennas). The router, assembled in a robust metal box, is equipped with five 1Gb Ethernet
ports, one SFP cage together with interfaces of RS232, RS485, CAN bus, two binary inputs
and two binary outputs. To backup the cellular connection, the router offers two SIM card
readers on the rear side of the router under the SIM cover. A microSD card can be inserted
under this cover as well. The designated router models can be equipped with a WiFi module
with 3x3 MIMO antennas.
Configuration of the router may be done via a password-protected Web interface. Web in-
terface provides detailed statistics about the router's activities, signal strength, detailed system
log etc. The router supports VPN tunnels using IPSec (), OpenVPN, GRE, L2TP or PPTP to
make sure safe communication. IPv6 Dual Stack, DHCP, NAT, NAT-T, DynDNS, DNS proxy,
VLAN, QoS, NTP, VRRP, control by SMS, port forwarding, primary connection backup and
many other functions are supported.
The router provides diagnostic functions, which include automatically monitoring the
PPP connection, automatic restart in case of connection losses, Low Power Mode and hard-
ware watchdog that monitors the router status.
The user may insert Linux scripts which are started on various actions. It is possible to
create up to four different configurations for the same router. These configurations can be
switched when necessary via Web interface, SMS or binary input status.
The router can automatically upgrade its configuration and firmware from your central
server.
WebAccess/DMP
supported as well.
Examples of possible applications
• mobile office
• fleet management
• security system
• telematic
• telemetric
• remote monitoring
• vending and dispatcher machines
and
WebAccess/VPN
remote device management platforms are
2
ICR-4461

Advertisement

Table of Contents
loading

This manual is also suitable for:

Icr-4461sIcr-4461w3Icr-4461w3s

Table of Contents