Router Description - Advantech SmartFlex SR310 User Manual

3. Router Description

SmartFlex SR310 is an industrial cellular router intended for the global markets. This
router is an ideal device for wireless communication in mobile networks that make use of LTE,
UMTS, EDGE or GPRS technology. Due to the high speed of data transfer up to 130 Mbps
(download) and up to 30 Mbps (upload) is this router an ideal solution for specialized M2M
devices and IoT as well as for wireless connection of traffic and security camera systems,
individual computers, LAN networks, automatic teller machines (ATM) and other self-service
terminals.
The standard configuration includes two Ethernet 10/100 ports, one USB 2.0 Host port,
two binary inputs and one output (I/O connector). The device also has two readers for 3 V and
1.8 V SIM cards, which are located on the rear panel of the router. The router also includes
a microSD card port that supports up to 64 GB card storage (32 GB in the case of SDHC
cards). The router can be equipped with a WiFi module, but this must be part of the initial
configuration – it cannot be assembled to the router at some point in the future.
The router can be equipped with PoE PD (Power over Ethernet – Powered Device), which
allows the router to be powered via Ethernet. It can also be equipped with PoE PSE (Power
over Ethernet – Power Source Equipment), which lets the router to power other devices via
Ethernet. The SmartFlex router can also be configured with a wide variety of port options.
These can be SWITCH – three switched Ethernet ports; RS232-RS485/422 – combination of
serial interfaces; RS232-RS485-ETH – combination of serial interfaces and Ethernet port with
higher insulation. The router can be provided in either a plastic or metal casing, depending
upon the customer's requirements.
Configuration of the router may be done via a password-protected Web interface. Web in-
terface provides detailed statistics about the router's activities, signal strength, detailed system
log etc. The router supports the creation of VPN tunnels using IPSec, OpenVPN and L2TP
to ensure safe communication. DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS,
backup primary connection and many other functions are supported.
The router provides diagnostic functions which include automatically monitoring the PPP
connection, automatic restart in case of connection losses, and a hardware watchdog that
monitors the router status. The user may insert Linux scripts which are started on various
actions. It is possible to create up to four different configurations for the same router. These
configurations can be switched whenever necessary via Web interface, SMS or binary input
status. The router can automatically upgrade its configuration and firmware from your central
server. This allows for mass reconfiguration of numerous routers at the same time.
SmartFlex SR310
4